BK Precision MDL001 [MDL001-220V] Modular Programmable DC Electronic Load Mainframe w/RS232 & USB, 220 V

The BK Precision MDL001-220V is a multi-channel modular programmable electronic load system. Six different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output AC/DC power supplies to batteries, fuel cells, and photovoltaic arrays.

The MDL001-220V 220V version mainframe has four slots that can be configured with any assortment of the modules up to 8 channels (up to 16 channels with mainframe extension MDL002-220V). The high-performance electronic load module of the MDL001-220V is capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior. All panel operation and programming functions are carried out on the MDL001-220V mainframe panel. A wide range of dynamic loading applications can be simulated through user-programmable slew rates, load levels, duration, and conducting voltage.

Features:

---

• 220V Version
  
• Mainframe Only Modules are sold separately
  
• Optional modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
  
• Up to four modules can be installed into the MDL001 mainframe to support up to a total of 8 channels
  
• Support for up to 16 channels with (MDL002) mainframe extension
  
• Power range up to 2400 W (4800 W with mainframe extension)
  
• CC/CV/CR/CW/CZ operating modes
  
• Bright VFD display
  
• Transient mode up to 25 kHz
  
• Synchronous Load on/off function
  
• Adjustable slew rate in CC mode
  
• Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
  
• Short circuit test
  
• Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
  
• Remote voltage sensing to compensate for the effect of voltage drop in wires
  
• Operate identical modules in parallel mode for high current applications
  
• OVP/OCP/OPP/OTP and reverse voltage protection
  

What's In The Box:

---

• (1) Power Cord
• (1) Instruction Manual

Brochure/Datasheet

Instruction manual

Note: Prices are not binding , subject to change without prior notice